Black+Red 10 AWG Solar Panel Extension Cable Silicone Flexible Wire Connectors
Features 【Safe】Protecting against short circuits and ground leakages. Suitable for use inside and connected to insulated equipment. 【High performance】High current carrying capacity. 【High quality】Resistance against UV, water, ozone, fluids, oil, salt and general weathering. 【Wide use】Hard plastic connectors at each end. Suitable for using in solar panels, DC circuits, inverter wiring. 【Long life】Engineered for long life and outdoor applications. Good abrasion resistance,excellent softness and stripping performance. Connectors Test voltage: 6 kV (50 Hz) Operating temperature: -40°C ~ 85°C Approvals: IP 67 protecting grade, safety class ii, flame class UL94-V0 Contact resistance: ≤5mΩ Insertion / withdrawal force: ≤50N / ≥50N Locking system: Snap in Wire Diameter: 10AWG 6mm² Max. amps per conductor: 55A/70 A Max. voltage: 600 V Temperature rating: -104°F to 194°F Specification Color: Black&Red Connectors insulation material: PC/PA Connectors contact material: copper, silver-plated Wire conductor material: bare copper Wire insulation material: cross linked Polyethylene (XLP) Note: Please allow 1-3cm error due to manual measurement and make sure you do not mind before ordering. The color of the actual items may slightly vary from the above images due to different computer screen. Thanks for your understandin
Black+Red 10 AWG Solar Panel Extension Cable Silicone Flexible Wire Connectors
Features: 【Safe】Protecting against short circuits and ground leakages. Suitable for use inside and connected to insulated equipment. 【High performance】High current carrying capacity. 【High quality】Resistance against UV, water, ozone, fluids, oil, salt and general weathering. 【Wide use】Hard plastic connectors at each end. Suitable for using in solar panels, DC circuits, inverter wiring. 【Long life】Engineered for long life and outdoor applications. Good abrasion resistance,excellent softness and stripping performance. Product Description: Rated Voltage: DC 1500V Range of Temperature: -40 ~ +125ºC Insulation Material: Silicone Conductor Material:Tinned Copper Waterproof level: IP67 Cable Size: 10AWG Cable length: 6inches/ 1ft/ 2ft/ 3ft Applications: Widely used in solar panels, DC circuits, inverter wiring. Connectors: Test voltage: 6 kV (50 Hz) Operating temperature: -40°C ~ 85°C Approvals: IP 67 protecting grade, safety class ii, flame class UL94-V0 Contact resistance: ≤5mΩ Insertion / withdrawal force: ≤50N / ≥50N Locking system: Snap in Wire Diameter: 10AWG 6mm² Max. amps per conductor: 55A/70 A Max. voltage: 600 V Temperature rating: -104°F to 194°F Package included:[Please select the cable length] 1 x Black solar panel extension cable with connectors 1 x Red solar panel extension cable with connectors
Intermatic E1210WC Electronic Countdown Timer 10, 20, 30 & 60 Min Intervals NEW
Intermatic E1210WC Electronic Countdown Timer 10, 20, 30 & 60 Min Intervals NEW Free Shipping Very Fast Shipping The Intermatic E1210WC Electronic Countdown Timer is a reliable and efficient timer wall switch designed for electronics applications. With its sleek white rectangular box shape and vertical orientation, this timer is perfect for wall mounting. It offers precise timing for 10, 20, 30, and 60-minute intervals, making it ideal for various cooking and baking needs. The Intermatic brand ensures quality and durability, making this electronic countdown timer a must-have for any home or kitchen.
Intermatic 15 Amp 30-Minute Indoor In-Wall Electronic Countdown Timer with Prese
Replaces any standard wall switch. For use with decorator-style wall plate (not included).
Intermatic E1210WC Electronic Countdown Timer 10, 20, 30 & 60 Min Intervals NEW
SZMWKJ Complete 6000N Dual Axis Solar Tracker – Solar Panel Tracking Track Kits
SZMWKJ Complete 6000N Dual Axis Solar Tracker – Solar Panel Tracking Track Kits SZMWKJ Complete 6000N Dual Axis Solar Tracker – Solar Panel Tracking Track Kits Here for sale is Complete Dual Axis Solar Tracker Kits, items Include 2PCS 6000N Linear Actuators&Mounting Brackets and the Electronic LCD Controller Unit you need for a dual axis solar tracker system.We also provide the wind speed sensor (Anemometer) which is matching the solar tracker controller and can make the whole system to stay in a save position in strong wind condition. Build your own frame and you will get a professional grade Dual Axis Solar Tracker System! Wiring Diagram: About the 6000N Linear Actuators: For the 6000N linear actuators, we provide 150/200/300/400/450mm Stroke Optional, here for sale is 1PCS 150mm 6″ Stroke&1PCS 300mm 12″ Stroke, if you need other size, Pls Click Here About the Solar Tracker Controller: This is WST03-2 Dual Axis Solar Tracker Controller, The whole unit contains the Controller Box, Light Sensor With 3 Meters Wire and IR (infrared) Remote control. The controller analyzes the signal from the light sensor, then control the motor of the corresponding direction to execute positive rotation, reverse rotation and stop, and make the platform to be aligned with the sun. Three Modes will appear during the controller’s auto working, the controller will automatically switch the three modes according to different conditions. The three Modes are: Sunny Day Auto Tracking Mode, Night (Cloudy Day) Mode, Strong Wind Protection Mode. Users can set the parameters and working modes by the LCD screen for actual needs. There is an IR Remote for manual control, it can be used for testing when you assemble/use the controller the first time. Extra Limit Switch and Wind Speed Sensor (Anemometer) can be matched with the controller for actual needs. We provide more instruction and detailed settings in the English User’s Manual. About the Wind Speed Sensor (Anemometer) : This wind speed sensor is composed of a shell, three wind cups and a circuit module. The whole sensor has a high strength, weather resistance, corrosion resistance and water resistance, will be to ensure the long-term use of the instrument, and the accuracy of the wind speed collection. It is very suitable for outside measurement. Application: Solar tracking system: Solar photovoltaic System, solar thermal system, light guide and lighting, etc. Want more information? Additional information and detailed instructions can be found in the User’s Manual Package Included: * 1PCS 6000N 150mm (6″) 12V DC North/South Linear Actuator.* 1PCS 6000N 300mm (12″) 12V DC East/West Linear Actuator.* 4PCS Silver Mounting Brackets W/ 4PCS Bolts and 4PCS Cotter Pins for the linear actuators.* 1PCS Electronic LCD Controller Box.* 1PCS Light Sensor with 3 Meters Wire.* 1PCS IR Remote Control (No Battery Included).* 1PCS Wind Speed Sensor.* 1PCS English User’s Manual. Product Highlights of the Solar Tracker System: * Standard 1 year warranty.* Easy-installation.* Dual axis solar tracker provides up to 40% more power production.* With 2PCS 6000N/600kg/1320lbs max lift linear actuators for large/high power solar panel system.* Engineered to hold up to 2000 Watts of solar panels.* Small self–consumption. Caution: * The Input Voltage for the whole system should be DC 12V.* Never approach a solar tracker while the Solar Tracker electronics are “on”.* The solar tracker can move unexpectedly and the powerful linear actuator/motor can cause serious injury or death.* Always disconnect the Solar Tracker electronics from its power supply before approaching the solar tracker. About Shipping: * This item will be shipped out within 1-3 Business Days after confirmed payment received. * Goods in stock in USA warehouses, buyer can get the parcel around 3-5 business days. * We provide tracking number freely for all buyers. * Please confirm your shipping address is correct. Buyers are responsible for undeliverable order due address mismatch. We reserve the right to charge shipping fee to reship undeliverable items. * Any potential customs tax fee applied to the parcel should be covered by the buyer. On Oct 18, 2023 at 20:15:41 PDT, seller added the following information:
WST03-2 LCD Solar Tracker Controller W/ Wind Sensor DIY Solar Panel Tracking Kit
WST03-2 LCD Solar Tracker Controller W/ Wind Sensor DIY Solar Panel Tracking Kit Click Here to But It Now Click Here to But It Now Click Here to But It Now WST03-2 LCD Solar Tracker Controller W/ Wind Sensor DIY Solar Panel Tracking Kit About the Solar Tracker Controller: This is WST03-2 Dual Axis Solar Tracker Controller, items include the Controller Box, Light Sensor With 3 Meters Wire and IR (infrared) Remote control, we will provide English Manual together with the controller. The controller analyzes the signal from the light sensor, then control the motor of the corresponding direction to execute positive rotation, reverse rotation and stop, and make the platform to be aligned with the sun. Three Modes will appear during the controller’s auto working, the controller will automatically switch the three modes according to different conditions. The three Modes are: Sunny Day Auto Tracking Mode, Night (Cloudy Day) Mode, Strong Wind Protection Mode. Users can set the parameters and working modes by the LCD screen for actual needs. There is an IR Remote for manual control, it can be used for testing when you assemble/use the controller the first time. Extra Limit Switch and Wind Speed Sensor (Anemometer) can be matched with the controller for actual needs. We provide more instruction and detailed settings in the English User’s Manual. About the Wind Speed Sensor (Anemometer) : This wind speed sensor is composed of a shell, three wind cups and a circuit module. The whole sensor has a high strength, weather resistance, corrosion resistance and water resistance, will be to ensure the long-term use of the instrument, and the accuracy of the wind speed collection. It is very suitable for outside measurement. Application: Solar tracking system: Solar photovoltaic System, solar thermal system, light guide and lighting, etc. Want more information? Additional information and detailed instructions can be found in the User’s Manual. About Shipping: * This item will be shipped out within 1-3 Business Days after confirmed payment received. * We provide tracking number freely for all buyers. * We ship via Standard Delivery from China which usually takes 8-12 working days to United States. * For other countries, we normally ship by China Post/Singapore Post which takes about 25-40 business days. Please make sure you accept the shipping time before you make purchase. * Please confirm your shipping address is correct. Buyers are responsible for undeliverable order due address mismatch. We reserve the right to charge shipping fee to reship undeliverable items. * Any potential customs tax fee applied to the parcel should be covered by the buyer. On Oct 18, 2023 at 20:15:41 PDT, seller added the following information:
Lightweight Mini Vacuum with Strong Suction – Perfect for Keyboard, Desktop D…
The Lightweight Mini Vacuum by Hkodp is a versatile cleaning tool perfect for indoor use, particularly on electronics like keyboards and desktops. With strong suction power and a handheld form factor, this vacuum is easy to handle and maneuver. The compact size and included dusting brush make it convenient for quick cleanups and reaching tight spaces. The corded electric power source ensures continuous cleaning without the need to recharge, while the gray color adds a sleek and modern touch to your cleaning routine. Weighing only 0.22 pounds, this portable vacuum is a must-have for any home or office.
MHPOWOS 20Ft 12 AWG Solar Panel Extension Cable Solar Wire Connectors Black Red
Wide Range of ApplicationsSolar extension cable is moisture, UV and corrosion resistant. Designed for long life and outdoor applications.Our product is suitable for solar power plants, PV connectors and PV junction boxes and can be easily connected to similar connector types supplied with most solar modulesQuick and Easy ConnectionMHPOWOS solar extension cable can help you to position your solar panels anywhere with ease and flexibility.The solar connector is plug-and-play. Press fingers to either side of the built-in lock on the male connector can connect and disconnect the connector easily, without using other toolsWaterproof and Durable An IP67 waterproof ring on the male solar connector is perfect for sealing out water and dust to prevent corrosion.The connector is stable and safe with the built-in lock, which is durable outdoors. The PV cable is designed to withstand extreme heat and coldHigh-quality materialsSolar panel wires are made of high-quality copper or aluminum materials,which have good conductivity and can minimize energy loss, ensuring maximum utilization of solar energy2 years long term warranty20FT Long Cable
