2 Pack Universal Compatible 75 GPD Reverse Osmosis RO Membrane NSF certificated
HIGH EFFICIENT FILTRATION HIDROTEK Ro membrane rejects impurities down to 0.0001 micron.High permeated flow and stable salt rejection. Removes up to 98% of contaminants in water (Minimum Rejection 96%). it can remove the particles of heavy metal (primarily fluoride,calcium, magnesium, lead,colloids , chromium and nitrates) and any other 1000+ contaminants from source water. and NSF/ANSI Standard 58 certificated . Universal standard size Standard size ( Membrane Dimensions: 11. 75″ Overall Length, 1. 75″ Diameter), Fits all Standard 2″ ID Membrane housing.HIDROTEK supreme quality water filters are universal industry standard size and fit most residential Reverse Osmosis Systems and water filtration systems. Wastewater ratio is 1:2 NSF certificated Thin-film composite RO membrane filters with higher water production rate. 2 gallons waste water will be produced for every gallon pure water. Operation Specification: FEED WATER PRESSURE :35 – 100 PSI TEMPERATE: 40 – 110°F/5-45°C PH :3.0 -11.0 MAX TDS 1000 MG/L TURBIDITY < 1.0 NTU MAX SDI <4.0 HARDNESS < 5 GPG IRON <0.1 Life time :15-24 months as your feed water quality Shelf life: 2 years in original sealed package. More valuable information: Question: What is dimension of the Ro membrane? Answer: It is standard size ( Membrane Dimensions: 11. 75" Overall Length, 1. 75" Diameter), and Fits all Standard 2" ID Membrane Housings. Question:What is the life time? Answer:Our suggestion is 24 months for most tap water (200-500 ppm).usually, you replace membrane depends on usage amount and feed water quality. if tap water is very good quality (200 ppm or less), you may replace the membrane per 36 months. if hard water area, someone replace membrane 6 months or 12 months. it is time to replace new one if flow rate is too less or membrane is cloged. Question:Could I use it if my water Total Dissolved Solids is over 1000 ppm or very hard well water? Answer: Yes, you can use it. even TDS reach 2000 ppm. but you should replace membrane every 12 months or more frequently .less 1000 ppm is our suggestion. Question:Can this be used for brackish water(5000 ppm) or ocean water with high salinity(35000 ppm)? Answer:No. it is just designed for residential tap water use. if you need Ro membrane for brackish water or ocean water and industrial use, Geekpure can provide too, please send email to us. Question:What is in the box? Answer: Just 2 x 75 GPD RO membrane. if you need membrane housing, wrench and flow restrictor ,please buy it separated. Different temperature,different water pressure and feed water quality, the product water capacity and pure water quality is different. That is reason we feel low pure water capacity in the winter, but higher in the summer. Lab test condition : feed water pressure: 70 psi. work temperature: 77 F or 25 C. Nacl concentration: 250 ppm. recovery: 15%. Note: 1. DO NOT FREEZE. 2. Please keep flush new membrane 30 minutes. Because there is protection material in it. then, TDS of pure water will be down to right level. 3. If you have chlorinated water, we recommend you use a Carbon/Sediment Pre-Filter. The residual chlorine in municipal or city water will destroy the membrane. if hardness is too high, we recommend you install water softener before Ro unit. How to replace Ro membrane? 1.Remove the tube from the fitting and twist off the housing cap with wrench. 2.You should pull out old membrane before step 2 when you replace new membrane.(you may use pliers if necessary.) 3.Push the new membrane into housing. 4.Put the housing cap back and tighten it. and connect concern fitting and tube.
APEC Water ROES-50, 5-Stage Under Sink Reverse Osmosis Water Filter System
Filtration Type Reverse Osmosis. • Reduced bottled water dependence. NSF-Certified Filtration. • Independently tested filtration performance. Long Filter Life. Installation Type Under Sink. Cost-Effective Alternative to Bottled Water.
RO Auto Shutoff Valve (ASO valve) + Flow Restrictor (300-1200 cc/min)
New 1/4″ automatic shutoff valve for reverse osmosis. The valves are constructed from virgin polypropylene using injection molding and very well constructed. The valve operates off a pressure signal and will automatically shut off when system pressure is approximately 65% of supply pressure. We have tested these valves extensively in our RO units and found them to be extremely durable and trouble/leak free. Inlets are color coded for ease of installation. Instructions included. All valves are tested at 60 psi water pressure, prior to shipment. Connections – 1/4″ push to connect Connection 1 (inlet/outlet) – Supply water from last prefilter to RO membrane housing inlet Connection 2 (inlet/outlet) – Permeate out from RO membrane housing to RO water storage tankPremium Axeon inline flow restrictors. Available for 50 gpd, 75 gpd, 100 gpd, and 150 gpd RO membranes. Install the flow restrictors between the “Brine” port on the RO membrane housing and drain saddle, for systems with an automatic shutoff valve. For systems with a permeate pump, install between “Brine” port on the RO membrane housing and “Brine In” port on the permeate pump. Directional arrows are provided on the flow restrictors. For correct flow restrictor sizing, please consult your membrane manufacturer or use the guide below. We recommend a brine:permeate ratio of 3-4:1 for optimal results (i.e. RO water production and membrane life). Recommended flow restrictor based on stated RO membrane daily water production rate* 36 GPD = 300 cc/min – 350 cc/min 50 GPD = 350 cc/min – 420 cc/min 75 GPD = 550 cc/min – 800 cc/min 100 GPD = 800-1000 cc/min150 GPD = 1000-1200 cc/min Brine:Permeate Ratio*36 GPD = 3.17:1 (300 cc/min) to 3.70:1 (350 cc/min) 50 GPD = 2.66:1 (350 cc/min) to 3.2:1 (420 cc/min) 75 GPD = 2.79:1 (550 cc/min) to 4.05:1 (800 cc/min) 100 GPD = 3.04:1 (800 cc/min) to 3.8:1 (1000 cc/min) 150 GPD = 2.53:1 (1000 cc/min) to 3.04:1 (1200 cc/min) *Brine:Permeate ratios are calculated based on rated RO membrane daily water production rate (GPD). The recommended flow restrictor may vary, based on RO membrane manufacturer.
iSpring 500GPD Tankless RO Reverse Osmosis System Drinking Water Filter Purifier
Geekpure 5 Stage Reverse Osmosis Water Filter System wtih 5 extra Filters-75 GPD
Features: BPA free,Food grade materials. HIGH EFFICIENT FILTRATION-5-Stage Under-Sink Reverse Osmosis Drinking Water Filtration System with certificated Thin-film composite RO membrane filters down to 0.0001 micron,Reduce 99% contaminant,including Heavy Metal, Arsenic, Lead ,Mercury ,Fluoride, Hardness,Cadmium,Chlorine,Taste,Odor,Asbestos,Hydrocarbons,Cyanide,Trivalent chromium and more 1000+ contaminants. HIGH QUALITY– All tube, fittings, storage tank,Ro membrane complies with ANSI standard 58 to provide healthy, safe, and pure water, certificated LEAD FREE deluxe kitchen sink faucet as last pure water guarantee in your home. EASY&CONVENIENT-Streamlined DIY filter installation; fits most under sink cabinets, the ratio of pure water and waste water is 1:2. RESPONSABLE MANUFACTURER- ISO9001:2008 certificated Manufacturer ,also Member of Water Quality Association (WQA).Warranty-1year limited Product quality and service guarantee. Specification: FEED WATER PRESSURE: 40 – 100 PSI TEMPERATE:40-110°F/5-45°C PH:3.0 -11.0 MAX TDS :1000 PPM TURBIDITY < 1.0 NTU MAX SDI <4.0 HARDNESS < 5 GPG IRON <0.1 MANGANSESE <0.05 Shelf life: 3 Years More valuable information:What is dimension of installed Geekpure RO5 Machine?RO unit: Length 14.20 inch, Width 6.2 inch, Height 18.1inch.Storage tank: Diameter 9.45 inch, Height 14.4inch.weight:27.32lb What is 5 stage filter and function?the 1st stage: PP spun filter, Remove sand, dirt, sediment.the 2nd stage: Granular carbon filter, Remove chlorine, taste & odors, very fine particulatesthe 3rd stage: Carbon block filter, Further remove chlorine, taste & odors, very fine particulatesthe 4th stage: TFC Ro membrane, Reduce 99% total dissolved minerals, heavy metal, Arsenic, Mercury, Iron, lead ,Fluoride and 1000+ contaminants .the 5th stage:Post inline acid washed coconut carbon filter, Polish water for refined taste. Where can I buy replace filters?In geekpure store on ebay. What is in the box?1 complete Ro water purifier with 5 pcs filters includes(75G ro membrane), and 5 pcs replacement filters(100G membrane). BPA free?Yes, BPA free ,Lead free and food grade materials.
Geekpure 5 Stage Reverse Osmosis RO Water Filter System Free 7 Filters-Refurbish
Total is 12 filters Plus extra 7 replacement filters for free and at least 2 years use. Total is 12 filters . Lead Free Faucet Premium ceramic disc operated, certified lead-free ro drinking water dispensing faucets. 3/8 inch input. Faucet has a mounting range of ½?- 1 ½? for installation in a sink or countertop. Wastewater ratio is 1:2 NSF certificated Thin-film composite RO membrane filters with higher water production rate. 2 gallons wastewater will be produced for every gallon pure water. Features: BPA free,Food grade materials,Plus Extra 7 Replacement Filters for Free. HIGH EFFICIENT FILTRATION-5-Stage Under-Sink Reverse Osmosis Drinking Water Filtration System with NSF certificated Thin-film composite RO membrane filters down to 0.0001 micron,Reduce 99% contaminant,including Heavy, Metal, Arsenic, Lead, Mercury, Fluoride, Hardness,Cadmium,Chlorine,Taste,Odor,Asbestos,Hydrocarbons,Cyanide,Trivalent chromium and more 1000+ contaminants. HIGH QUALITY– All tube,quick push fittings, storage tank,Thin-film composite Ro membrane complies with NSF/ANSI standard 58 to provide healthy, safe, and pure water, LEAD FREE deluxe kitchen sink faucet as last pure water guarantee in your home. EASY&CONVENIENT-Streamlined DIY filter installation; fits most under sink cabinets, the ratio of pure water and waste water is 1:2. Warranty-1 year limited Product quality and service guarantee,plus extra 7 replacement filters for free and at least 2 years use. System comes with all parts and videos for an easy DIY experience,Don?t waste money for professional installation,you can understand everything about your system and install it with our clear, well-organized instructions in a couple of hours . Specification: FEED WATER PRESSURE: 40 – 100 PSI TEMPERATE:40-110°F/5-45°C PH:3.0 -11.0 MAX TDS :1000 PPM TURBIDITY < 1.0 NTU MAX SDI <4.0 HARDNESS < 5 GPG IRON <0.1 MANGANSESE <0.05 Shelf life: 3 Years More valuable information: ?What is dimension of installed Geekpure RO5? RO unit: Length 14.20 inch, Width 6.2 inch, Height 18.1inch. Storage tank: Diameter 9.45 inch, Height 14.4inch. weight: 27.32lb ?What is 5 stage filter and function? the 1st stage: PP sediment filter. Remove sand, dirt, sediment. the 2nd stage: Granular carbon filter. Remove chlorine, taste & odors, very fine particulates the 3rd stage: Carbon block filter. Further remove chlorine, taste & odors, very fine particulates the 4th stage: TFC Ro membrane. Reduce 99% total dissolved minerals, heavy metal, Arsenic, Mercury, Iron, lead ,Fluoride and 1000+ contaminants . the 5th stage:Post inline acid washed coconut carbon filter. Polish water for refined taste. ?Where can I buy replace filters? RO5-50 GPD RO5-75 GPD RO5-100GPD RO5-4 ?What is in the box? 1 complete Ro water purifier and 7 pcs extra free replacement filters for at least 2 years use. ?BPA free? Yes, BPA free ,Lead free and food grade materials. Note: 1.It Is Recommended to Wait Until the Entire System Is Pressurized (Including Storage Tank&Faucet) and Re-Check for Any Leaks Before Leaving Installation Site. 2.It Is Normal for Some Black Carbon Fines to Appear in The Water When Emptying the First 2 Tanks of Water. The First 2 Tanks of Water Produced Should be Emptied and Not Used. 3.Push the Tubing All the Way in and Use Teflon Tape During Installation. You may be interested in: E01 E02-HD E02-AF E03-UV A01 FFD * About the water adapter, it can be changed in size (3/8" or 1/2"), just rotate one end down and install it to the other end.
APEC Water FI-ES-CAB10 Carbon (2) FI-ES-SED10 Sediment Filters (1) 10 Inches
Lot of 3 10″ APEC ESSENSE Water Filters. • Carbon block filters reduce chlorine, taste, odor, and VOCs. FI-ES-CAB10 Carbon Filters (2). • Includes two FI-ES-CAB10 10″ coconut carbon block filters.
Reverse Osmosis Replacement Filters Set for Standard 5 Stage System 75GPD 4Pcs
PP-Sediment Filter It is the 1st stage of Reverse Osmosis System. Function: Removes dust ,sand, silt, dirt, and rust particles in water. Specification: Micron Rating: 5µm , Dimension:10×2.5inch , Operating pressure:30-100psi , Temperature:33-100°F , Service life: 6-12 Months . Granular Carbon Filter It is the 2nd stage of Reverse Osmosis System. Function: Removes the chlorine, taste ,odors, cloudiness, colors organic matter, odor, smell turbidity. Specification: Micron Rating: 5µm , Dimension:10×2.9inch , Operating pressure:30-100psi , Temperature:33-100°F , Service life: 6-12 Months . Carbon Block Filter It is the 3rd stage of Reverse Osmosis System. Function: Further removes residual chemicals, odor and suspending particles, ensure purity. Specification: Micron Rating: 5µm , Dimension:10×2.7inch , Operating pressure:30-100psi , Temperature:33-100°F , Service life: 6-12 Months . Post Coconut Carbon Filter It is the 5th stage of Reverse Osmosis System. Function: Removes any possible residual taste & impurity from the tank. Specification: Dimension:10×2 inch , Operating pressure:30-100psi , Temperature:33-100°F , Service life: 6-12 Months . Feed Water Specification: FEED WATER PRESSURE: 40 – 100 PSI , TEMPERATE:40-110°F/5-45°C , PH:3.0 -11.0 , MAX TDS :1000 PPM , TURBIDITY < 1.0 NTU , MAX SDI <4.0 , HARDNESS < 5 GPG , Shelf life: 3 Years . More valuable information: 1. What is dimension of the Geekpure Replacement Water Filters? If not Geekpure, the filters is available to other brands Ro water purifier? Answer : 3 x prefilters is 2.5"ODx 10" height. the post carbon filter is 2"x10", all is standard size. Please don't worry. it compatible to most Ro system which its 10inch standard sized undersink ro systems . 2. What is 5 stage filters and functions? Answer : the 1st stage: PP spun filter, Remove sand, dirt, sediment. life time:6-12months. the 2nd stage: Granular activited carbon filter, Remove chlorine, taste & odors, very fine particulates. life time:6-12months. the 3rd stage: Barbon block filter, Further remove chlorine, taste & odors, very fine particulates. life time:6-12months. the 4th stage: Post inline acid washed coconut carbon filter, Polish water for refined taste. life time:12months. The Life Time of the Filter Cartridge Depends on Usage Amount and Feed Water Quality. 3. What is in the box? Answer : 1 x PP sediment ,1 x Granular Activited Carbon ,1 x Carbon Block Filters and 1 x Post inline Coconut Carbon. And 2 x 1/4"NPT quick fittings ,1 Roll Teflon seal tape for post carbon filter.
Reverse Osmosis Replacement Filter Cartridges Set for Ro System-2.5″x10″- Pack 4
div> PP-Sediment Filter It is the 1st stage of Reverse Osmosis System. Function: Removes dust ,sand, silt, dirt, and rust particles in water. Specification: Micron Rating: 5µm , Dimension:10×2.5inch , Operating pressure:30-100psi , Temperature:33-100°F , Service life: 6-12 Months . Granular Carbon Filter It is the 2nd stage of Reverse Osmosis System. Function: Removes the chlorine, taste ,odors, cloudiness, colors organic matter, odor, smell turbidity. Specification: Micron Rating: 5µm , Dimension:10×2.9inch , Operating pressure:30-100psi , Temperature:33-100°F , Service life: 6-12 Months . Carbon Block Filter It is the 3rd stage of Reverse Osmosis System. Function: Further removes residual chemicals, odor and suspending particles, ensure purity. Specification: Micron Rating: 5µm , Dimension:10×2.7inch , Operating pressure:30-100psi , Temperature:33-100°F , Service life: 6-12 Months . Post Coconut Carbon Filter It is the 5th stage of Reverse Osmosis System. Function: Removes any possible residual taste & impurity from the tank. Specification: Dimension:10×2 inch , Operating pressure:30-100psi , Temperature:33-100°F , Service life: 6-12 Months . Feed Water Specification: FEED WATER PRESSURE: 40 – 100 PSI , TEMPERATE:40-110°F/5-45°C , PH:3.0 -11.0 , MAX TDS :1000 PPM , TURBIDITY < 1.0 NTU , MAX SDI <4.0 , HARDNESS < 5 GPG , Shelf life: 3 Years . More valuable information: 1. What is dimension of the Geekpure Replacement Water Filters? If not Geekpure, the filters is available to other brands Ro water purifier? Answer : 3 x prefilters is 2.5"ODx 10" height. the post carbon filter is 2"x10", all is standard size. Please don't worry. it compatible to most Ro system which its 10inch standard sized undersink ro systems . 2. What is 5 stage filters and functions? Answer : the 1st stage: PP spun filter, Remove sand, dirt, sediment. life time:6-12months. the 2nd stage: Granular activited carbon filter, Remove chlorine, taste & odors, very fine particulates. life time:6-12months. the 3rd stage: Barbon block filter, Further remove chlorine, taste & odors, very fine particulates. life time:6-12months. the 4th stage: Post inline acid washed coconut carbon filter, Polish water for refined taste. life time:12months. The Life Time of the Filter Cartridge Depends on Usage Amount and Feed Water Quality. 3. What is in the box? Answer : 1 x PP sediment ,1 x Granular Activited Carbon ,1 x Carbon Block Filters and 1 x Post inline Coconut Carbon. And 2 x 1/4"NPT quick fittings ,1 Roll Teflon seal tape for post carbon filter. Geekpure 5-Stage Reverse Osmosis Replacement Water Filter Set w/ 75 GPD Membrane Geekpure 5-Stage Reverse Osmosis Replacement Water Filter Set w/ 100GPD Membrane
Geekpure 5-Stage Reverse Osmosis Replacement Water Filter Set w/ 100GPD Membrane
Water Filter Set-4 Water Filter Set-50G Water Filter Set-75G
